show counters interface management

Displays counter information for specified management interface.

Syntax

show counters interface management number

Parameters

number: Specifies the management interface by number.

Modes

Exec mode

Examples

The following example shows counters information for management interface 0.

device# sh counters interface management 0   
Statistics  
 Carrier Transitions: 0 
           LastClear: 0s 
Input: 
              Total pkts: 36892 
          Broadcast pkts: 2833 
            Discard pkts: 0 
             Errors pkts: 0 
              CRC Errors: 0 
              MCast pkts: 32459 
                  Octets: 3016973 

Out: 
              Total pkts: 1793 
          Broadcast pkts: 379 
            Discard pkts: 0 
             Errors pkts: 0 
              MCast pkts: 44 
                  Octets: 480103 
Rate Info: 
                   Input: 0.014576 Mbits/sec, 15 pkts/sec 0.00% of line-rate 
                  Output: 0.004194 Mbits/sec, 3 pkts/sec 0.00% of line-rate